For building product manufacturers · LEED® v5 and v4.1

Your product's LEED® v5 contribution on one sheet

When an architect, contractor or LEED consultant asks for documents, have a sheet ready that shows your product's contribution. Ecowa Spec assesses your documents and prepares the sheet you share with the project team, together with a roadmap that shows what is missing and what to do next.

Every review is checked by our LEED AP® BD+C and WELL AP™ expert.

From your documents to information the project can use

Your existing documents

EPDs, content declarations, emissions documents and related product data.

The sheet you share with the project

The LEED contributions your documents support, the values to enter in the calculators and a QR status link.

Your own roadmap

Missing documents, renewals due and priority steps to strengthen your contribution.

Why it matters

You have the documents. How will the project team assess them?

On LEED projects, submitting a document is not enough: the team also checks which product it covers, whether it is valid and what it means for the credit in question. Scattered or incomplete information leads to extra correspondence and can delay the assessment of your product. In the meantime, the project may turn to an equivalent product with documents ready.

Ecowa Spec turns your existing documents into a clear summary the project team can use.

Be ready for document requests

Instead of compiling the information again for every request, your sales team can share the product sheet together with the supporting documents.

Explain your product's contribution clearly

Architects and consultants can see which LEED credits your product can contribute to and which documents that contribution rests on.

Use it in talks abroad

You can share your English sheet with international project teams, buyers and distributors.

How it works

Share your documents, see your contribution and what is missing

  1. Start with one product

    Send the certificates, declarations and test reports you have. For sanitaryware and fittings, also share related product data such as flush volumes and flow rates.

  2. We assess your documents

    We review product scope, document validity and the relevant LEED requirements. Our expert checks the results.

  3. Receive your sheets and roadmap

    As part of the paid service, we prepare the sheets you share with project teams and a readiness report for your team only.

The first step is a free preliminary review. It briefly identifies possible contributions and missing documents; the full sheets and roadmap are quoted separately.

What you get

A sheet for the project, a roadmap for you

For sharing

Product sheets for LEED v5 and v4.1 projects

One-page sheets in English that bring together your product's document-based contributions and the related calculator values. Separate sheets are prepared for LEED v5 and v4.1; the v5 sheet also shows the product's estimated MAS.

The supporting documents are listed, so the project team can see where each piece of information comes from.

For your team only

Readiness report and roadmap

Missing or expired documents, the information needed to complete the assessment and priority steps to strengthen your contribution.

Where needed, we also provide manufacturer declaration templates for you to check and complete. The report is prepared in Turkish or English.

On every sheet

QR status page

The QR link on the sheet shows whether the documents are current. When a document expires, the page shows that the sheet is no longer current.

See the sample

What does the sheet you send to the project team look like?

Top of a sample Product Sustainability Sheet for LEED v5 projects, fictitious data: Example Porcelain Tile, flooring, estimated MAS 2.0

The sample sheet shows the product information, document-based contributions, calculator values and the QR status link. The full sample sheet comes with your preliminary review.

The sample uses fictitious product and document data.

QR code linking to the sample status page

Scan the QR code with your phone or

See the sample QR status page →

Why Ecowa Spec?

An assessment that summarises your documents with project use in mind

Values the consultant can use directly

Values are presented to match the fields in the LEED calculators. The supporting documents are listed on the same sheet.

Contributions based on documents

Contributions your current documents support are kept apart from topics that need further documents. The sheet makes no claim of a "LEED approved product" or of guaranteed project points.

Separate outputs for LEED v5 and v4.1

The project receives the sheet for the version it uses; the requirements of different versions are not presented as one assessment.

Document validity tracking

The QR status page makes it easier to check that documents are current. The duration and scope of document tracking, notifications and updates are set out in your quotation.

Water data for sanitaryware and fittings

For these products, flush volumes and flow rates are added to the sheet in a form that can be used in the water efficiency assessment.

Which products?

Find your product group

LEED v5 assesses building products in nine categories (MRc4). The scope of the assessment depends on your product type, where it is used and the documents you have.

Product groupExamples
Paints and coatingsInterior paint, varnish, decorative render
Adhesives and sealantsTile adhesive, grout, silicone
FlooringCeramic and porcelain tile, vinyl, carpet, wood flooring
WallsWall tile, panels, gypsum board, interior doors
CeilingsSuspended ceiling panels, gypsum ceilings
InsulationStone wool, glass wool, XPS, EPS
FurnitureCountertops, tables, seating
Composite woodMDF, particleboard, plywood
Plumbing fixturesToilets, urinals, lavatory faucets, showerheads

Can't find your product?

Choose "Other / Not sure" in the preliminary review form and we will clarify the scope together.

Technical scope and category details

Under LEED v5 MRc4, the category depends on where the product is used. For insulation, for example, the installation location affects the assessment.

For sanitaryware and fittings, water efficiency is assessed separately from the materials credits (LEED v5 WEp2/WEc2, v4.1 Indoor Water Use Reduction). The related water data appear in a separate part of the same sheet.

Structural products such as concrete and steel are not part of these nine categories; under LEED v5, their EPDs feed the building-level embodied carbon assessment (MRp2, MRc2). The scope of the service is clarified in the preliminary review.

Free preliminary review

Start with one product

Share your product and the documents you have. Within 2 business days of receiving the necessary information and documents, we send you a short email summarising possible LEED contributions and missing documents.

  • It is free and places you under no obligation to buy.
  • You can share links to public documents.
  • If you wish, we can also send a quotation for the sheets and roadmap.

If you have no links, you can email your files to info@ecowasolutions.com after you apply. If you have no documents yet, say so in the note.

Do not send formulations, recipes or trade secrets.

Frequently asked questions

What do I get from the free preliminary review?

A short email that summarises, based on the information you have, which LEED credits your product can contribute to and which documents are missing for the assessment. The full product sheet and detailed roadmap are not part of this step.

What do the sheets and roadmap cost?

We prepare a quotation based on the number of products and the scope of the assessment. The preliminary review is free; if you wish, we send a quotation for the paid service. The quotation sets out the delivery time, the outputs and the scope of document tracking and updates.

Is Ecowa Spec software or a consulting service?

It is a software-supported assessment service, checked by an expert. Documents are assessed with rules built on the LEED guides and the related calculators, and our expert reviews the results.

Will our product receive LEED certification?

No. LEED certification is awarded to projects, not products. An Ecowa Spec sheet is not a certification either; based on your product's documents, it shows which LEED credits the product can contribute to. How the product is used on a project and the final assessment are up to the project team.

Which documents should I send?

If you have them, share EPDs, HPDs, Declare, Cradle to Cradle or FSC documents, emissions certificates or test reports, and recycled content documents. For sanitaryware and fittings, the related flush volumes and flow rates are also needed.

Not every product needs every document; we work out what your product needs.

Can we apply if we have no documents yet?

Yes. Share your product and where it is used. In the preliminary review we tell you where to start. What the sheet can show, however, depends on the evidence provided.

What is the estimated MAS?

LEED v5 gives every product a score from 0 to 5 (Multi-Attribute Score, MAS). The score depends on the product's documents in climate, human health, ecosystems, social impact and circular economy. Ecowa Spec calculates the estimated MAS from your current documents. This score is not a LEED point; the project's points are set by calculating all products in the category together.

Can it be used on LEED v4.1 projects?

Yes. As part of the service, separate sheets are prepared for LEED v5 and v4.1, so the project team can review the information for the version it uses.

What happens when a document expires?

The QR status page shows whether the sheet is current. Assessing the renewed document and updating the sheet are carried out within the scope set out in your service quotation.

What is LEED?

LEED is a green building certification system that assesses the sustainability performance of buildings and projects. The documents and performance characteristics of the building materials used can contribute to meeting the related project requirements.

About

From project experience to what manufacturers need

Ecowa Spec is the service Ecowa Solutions built for building product manufacturers. We turn our LEED project experience into outputs that help manufacturers present their products' contributions clearly and see which documents are missing.

Reviews are checked by our LEED AP® BD+C and WELL AP™ expert.

Contactinfo@ecowasolutions.comEcowa Solutionsecowasolutions.com